Introduction of the function and working principle of the feeding machine of CNC five-spindle centerless grinder
CNC five-spindle centerless grinder feeding machine is a high hydrostatic pressure CNC five-spindle centerless grinder, with a dedicated feeding machine to achieve automatic grinding of workpiece. Through matching and connecting with the system, combining the control technology of grinding machine at home and abroad and field experience, the system program is designed, which has the function of automatic compensation of grinding wheel consumption and dressing, set empirical parameters to adjust the table feed to adjust the diameter of the workpiece size, control the workpiece geometric size accuracy. At the same time, it has the functions of counting statistics, warning before grinding wheel repair, first piece stop (detection) after grinding wheel repair and continuous function.
The feeding machine of the centerless grinder has rich alarm and protection functions, which guide the user to deal with simple faults, simplify the complicated program, professional control interface, and simple processing parameters, non-professional training can also be competent to process production, greatly reduce the professional input of human resources, and reduce human resources costs. The feeding and receiving mode adopts the step feeding and receiving machine, and the workpiece is sent to the grinding position by the manipulator. The feeder is provided with a manual adjusting screw, after the grinding wheel is worn, the screw can be manually adjusted to adjust the position of the workpiece to suit the clamping of the manipulator.
After the workpiece in the grinding area is clamped to the grinding position by the manipulator, the pushing cylinder moves, the workpiece in the working area is pushed to the holding position, and when the workpiece in the storage area is clamped, the storage area moves, the next area to store the workpiece arrives at the holding bit and repeats. The clamping position of the manipulator is adjustable, and the length range of the workpiece is 60-70 mm. After grinding one end of the workpiece, the manipulator will hold the workpiece to the rotary mechanism, the rotary mechanism will rotate the workpiece, the manipulator will hold the workpiece to grinding position, grinding the other end of the workpiece.

