The difference between CNC machining and traditional machining
Numerical control machining technology originates from conventional machining techniques and is an organic combination of conventional machining techniques, computer numerical control technology, computer-aided design, and assisted manufacturing technology. Due to the continuous development of technology, more and more parts require precision machining in modern manufacturing, and the requirements for machining accuracy and surface complexity of workpieces are also increasing. Therefore, CNC machining has received widespread attention, but in terms of cost savings, CNC machining still has higher costs than traditional machining. Below, we will specifically introduce the differences between CNC machining and traditional machining processes.
1. Processing technology
In ordinary machining processes, simplification can be applied to aspects such as positioning reference, clamping method, cutting tool, and cutting method. However, data processing technology is relatively complex and requires full consideration of these factors. Even for the same machining task, CNC machining technology can have multiple schemes, which can arrange multiple machining parts and cutting tools as the main thread in the process, The process has diverse characteristics, which is the difference between CNC machining process and traditional machining process.
2. Clamping and Fixtures
In CNC machining technology, it is not only necessary to ensure the relative fixation of the coordinate direction between the fixture and the machine tool, but also to coordinate the dimensional relationship between the parts and the machine tool coordinate system. Moreover, effective control of positioning and clamping is required during the clamping process. Moreover, under traditional machining techniques, due to the limited processing capacity of the machine tool itself, multiple clamping operations are required during the machining process. And it requires the use of specialized fixtures, which leads to higher costs in the design and manufacturing of fixtures, invisibly increasing the production cost of the product. The positioning of CNC machining technology can be adjusted using instruments, and in most cases, there is no need for specialized fixture design, so its cost is relatively low.
3. Cutting tools
During the machining process, the selection of cutting tools needs to be determined based on different machining processes and methods. Especially in CNC machining, the use of high-speed cutting is not only beneficial for improving machining efficiency, but also ensures machining quality, effectively reducing the probability of cutting deformation and shortening the machining cycle. Therefore, the demand for cutting tools further increases under high-speed cutting.
There is currently a dry cutting method that requires the tool to have good heat resistance, as it cuts without or with only a small amount of cutting fluid. Compared to ordinary machining processes, CNC machining processes have higher requirements for the performance of cutting tools.

