Analysis of Mechanical Processing Technology for Lathe Spindle Parts
Jan 12, 2024
1. Introduction
In the process of mechanical production and manufacturing of lathe spindle parts, staff should analyze and consider the requirements for various process control, confirm the machining accuracy and quantity, implement dynamic machining control throughout the entire process, and establish various machining management standards. The machining program involved in the lathe spindle parts is relatively complex. Before machining, the staff should adopt a top-level design strategy, clearly analyze the usage requirements of equipment and related parts, and improve machining efficiency.
2. Introduction to Machining of Lathe Spindle Parts
Lathe plays a significant role in industrial production, and related equipment mainly utilizes turning tool devices to process objects by rotating parts and tools. As an important internal component of the lathe, the machining quality of the lathe spindle determines the quality and efficiency of the lathe operation. It bears the responsibility of fixture installation, positioning of parts and tools, and achieving rotation control of equipment components, By continuously rotating in the main axis, control of equipment, cutting tools, and various equipment is achieved, thereby completing the machining of components. In short, the lathe spindle maintains a high-speed rotation state during cutting and polishing of components.
3. Analysis of machining process for lathe spindle parts
In the process of machining and controlling the spindle parts of the lathe, engineering personnel need to strictly control the technical processes involved, effectively design the production and processing procedures and steps. During the machining process, engineering personnel need to optimize and improve the mechanical processing technology and methods, and inspect and analyze various data such as the external shape, size, size, and quality of the workpiece; Secondly, relevant technical personnel also need to consider the production control quantity of relevant equipment and the external equipment usage conditions, clarify the relevant technical operation procedures, effectively set the production control mode and control content as corresponding process documents, so that all work has reference basis. In short, in mechanical production and processing activities, engineering personnel need to summarize and analyze the engineering documents used, Refer to the actual production status of the components to complete the writing and production of various process documents (as shown in Figure 1). In the process of processing and managing the lathe spindle parts, rough machining, semi precision machining, and fine machining are involved. The specific operation steps are as follows: rough machining of the outer circle surface (positioning with a top hole) → semi precision machining of the outer circle surface (positioning with a top hole) → drilling through holes (positioning with a semi precision machined outer circle surface) → rough machining of conical holes (positioning with a semi precision machined outer circle surface and a cone plug after processing) → fine machining of the outer circle surface (positioning with a cone plug top hole) → fine machining of conical holes (positioning with a precision machined outer circle surface).
In the process of mechanical production and manufacturing of lathe spindle parts, staff should analyze and consider the requirements for various process control, confirm the machining accuracy and quantity, implement dynamic machining control throughout the entire process, and establish various machining management standards. The machining program involved in the lathe spindle parts is relatively complex. Before machining, the staff should adopt a top-level design strategy, clearly analyze the usage requirements of equipment and related parts, and improve machining efficiency.
2. Introduction to Machining of Lathe Spindle Parts
Lathe plays a significant role in industrial production, and related equipment mainly utilizes turning tool devices to process objects by rotating parts and tools. As an important internal component of the lathe, the machining quality of the lathe spindle determines the quality and efficiency of the lathe operation. It bears the responsibility of fixture installation, positioning of parts and tools, and achieving rotation control of equipment components, By continuously rotating in the main axis, control of equipment, cutting tools, and various equipment is achieved, thereby completing the machining of components. In short, the lathe spindle maintains a high-speed rotation state during cutting and polishing of components.
3. Analysis of machining process for lathe spindle parts
In the process of machining and controlling the spindle parts of the lathe, engineering personnel need to strictly control the technical processes involved, effectively design the production and processing procedures and steps. During the machining process, engineering personnel need to optimize and improve the mechanical processing technology and methods, and inspect and analyze various data such as the external shape, size, size, and quality of the workpiece; Secondly, relevant technical personnel also need to consider the production control quantity of relevant equipment and the external equipment usage conditions, clarify the relevant technical operation procedures, effectively set the production control mode and control content as corresponding process documents, so that all work has reference basis. In short, in mechanical production and processing activities, engineering personnel need to summarize and analyze the engineering documents used, Refer to the actual production status of the components to complete the writing and production of various process documents (as shown in Figure 1). In the process of processing and managing the lathe spindle parts, rough machining, semi precision machining, and fine machining are involved. The specific operation steps are as follows: rough machining of the outer circle surface (positioning with a top hole) → semi precision machining of the outer circle surface (positioning with a top hole) → drilling through holes (positioning with a semi precision machined outer circle surface) → rough machining of conical holes (positioning with a semi precision machined outer circle surface and a cone plug after processing) → fine machining of the outer circle surface (positioning with a cone plug top hole) → fine machining of conical holes (positioning with a precision machined outer circle surface).
3.1 Rough machining
In the rough machining section, it involves the scientific selection of materials for processing relevant spindle parts, as well as the corresponding heat treatment. According to the processing requirements, the production and manufacturing control of the lathe spindle parts blank is completed. During this period, engineering personnel should consider the actual use of the lathe spindle, scientifically and reasonably select the corresponding workpiece materials, and then forge and shape them, and perform necessary heat treatment on the relevant materials, Through necessary thermal treatment, the material cutting performance of relevant components is effectively improved, ultimately resulting in a significant increase in the comprehensive performance of the lathe spindle. In addition, during the processing and control of part materials, the wear resistance of the surface of the lathe spindle parts during movement can also be effectively improved. Afterwards, production personnel need to select different production control modes based on the production and manufacturing situation of the lathe spindle parts blank, quantity, and production needs, such as combining free forging or large-scale production processing.
For example, in the rough machining process, a series of forging treatments are required first. During the forging process, necessary grinding and rough machining of holes are required (positioning with semi precision machined outer surface and matching with cone plugs after machining) → precision machining of outer surface (positioning with cone plug top hole) → precision machining of cone holes (positioning with precision machined outer surface).
3.1 Rough machining
In the rough machining section, it involves the scientific selection of materials for processing relevant spindle parts, as well as the corresponding heat treatment. According to the processing requirements, the production and manufacturing control of the lathe spindle parts blank is completed. During this period, engineering personnel should consider the actual use of the lathe spindle, scientifically and reasonably select the corresponding workpiece materials, and then forge and shape them, and perform necessary heat treatment on the relevant materials, Through necessary thermal treatment, the material cutting performance of relevant components is effectively improved, ultimately resulting in a significant increase in the comprehensive performance of the lathe spindle components. In addition, during the processing and control of part materials, the wear resistance of the surface of the lathe spindle parts during movement can also be effectively improved. Afterwards, production personnel need to select different production control modes based on the production and manufacturing situation of the lathe spindle parts blank, quantity, and production needs, such as combining free forging or large-scale production processing.
For example, in the rough machining process, a series of forging treatments are required first, and during the forging process, necessary grinding processes are required. In this process, a precision forging machine is used, and after completing the forging, heat treatment is required with the help of a tempering furnace. Then, necessary cutting treatment is carried out on the material through a sawing machine, referring to standard documents. Based on the length of the segment processed, after completing the sawing operation, a machine milling machine needs to be combined, Implement necessary milling and end face drilling based on the small end shape, and after completing the end face drilling, carry out turning machining to meet the actual needs of subsequent semi precision machining, and achieve preliminary machining control of the spindle parts. Forging (grinding/vertical precision forging machine) → Heat treatment (normalizing/tempering furnace) → Sawing (sawing the small end, maintaining a total length of 890+2.5mm/sawing machine) → Punching the center hole on the washing end face (drilling a 5mm center hole on the turning end face, small end shape/washing machine/drilling machine) → Turning (roughing the outer diameter of each section, with an average allowance of 2.5-3mm for the large end shape and the center hole on the broken end and small end/lathe).
3.2 Semi precision machining
In terms of corresponding semi precision machining, the radius of the lathe spindle parts needs to be effectively controlled, and initial machining management is required for structures such as taper holes, turning cone surfaces, and precision turning outer circles. This part is the key process for realizing basic functions of the lathe spindle parts. After completing semi precision machining, the external shape of the lathe spindle parts can be basically confirmed. This type of machining process involves some mechanical processing, It is necessary to combine various mechanical equipment such as lathes, drilling machines, milling machines, sawing machines, etc., and then perform necessary heat treatment on the lathe spindle parts to implement corresponding semi precision machining. In the process of rough machining management of the outer surface of the parts, it is necessary to combine the corresponding top hole positioning, and then rough machining of drilled through holes and tapered holes to ultimately achieve semi precision machining of the lathe spindle parts.
For example, in the process of semi precision machining, it is necessary to use the corresponding drilling machine to complete the fine drilling of the equipment. After completing the drilling, combined with heat treatment, the heat treatment control of the local area is completed according to the corresponding specifications, making the lathe processing more efficient and fast. Then, combined with the lathe and the imitation lathe, the preliminary processing of the appearance of the spindle components is completed. Car (outer diameter of each section of the rough car, with an allowance of 2.5-3mm for the large end shape and small end center hole/lathe) → Car (rough car D, E and 165mm outer circles, with an allowance of 2.5-3mm for the small end shape and 115mm surface/lathe) → Car (rough car large end rear section and 115mm outer circle connect with the upper process to level the large end shape and small end center hole/lathe) → Drill (drill 45mm guide hole, small end shape 115mm surface/drilling machine) → Drill (Drill 45mm through hole small end shape, 115mm deep surface hole/drilling machine).
3.3 Precision machining
In the subsequent precision machining process, it is implemented after semi precision machining, which is also the final machining program of the lathe spindle parts. After semi precision machining, the staff need to confirm the precision machining process. This machining process needs to be further processed on the outer surface of the lathe parts and the structural components of the relevant taper hole parts that have not been completed in the previous stage, combined with necessary analysis of the lathe spindle structure, Process the bolts, screw holes, taper holes, and threads accordingly. After completing the processing of the relevant areas, the spindle parts need to be quenched to improve the structural height and motion accuracy of the entire component. After quenching, the torque, bending moment, and rotation accuracy of the spindle parts can meet the corresponding setting requirements. After completing the processing, The staff needs to conduct refined inspections on it, implement comprehensive quality inspections on all parts of the lathe spindle parts, and ensure that the machining quality of the parts can meet the actual usage needs of the lathe main structure stiffness, strength, rotation accuracy, and operational accuracy.
4. Setting of machining reference for lathe spindle parts
4.1 Selection of Coarse Datum
In the process of controlling the machining of machine tool spindle parts, engineers need to ensure that the boundary between the relevant machining positions and the non machining positions is clear. Generally, the non machining surface needs to be selected as the reference line. During the machining process, the corresponding machining allowance should be analyzed based on each machining surface, and then it can be effectively allocated. In the process of selecting the reference, important machining surfaces need to be selected. In addition, the relevant reference cannot be used back and forth during the machining process. Due to the lack of high precision in coarse precision, it can cause significant machining errors. Therefore, coarse reference in the same dimension direction can only be used once.
4.2 Selection of Precision Benchmarks
In the process of selecting and selecting precision benchmarks, it is also necessary to ensure that the design benchmark and positioning benchmark can effectively overlap, minimize positioning errors generated during the machining process, and ensure the principle of unified control of benchmarks. In short, engineers need to process multiple workfaces under the same positioning benchmark to improve the accuracy of the machining positions on each surface. In general, it is necessary to use the two tips of shaft parts as corresponding positioning benchmarks; In addition, it is necessary to strictly refer to the control principle of mutual reference. If the surfaces of two workpieces have high machining accuracy requirements, they can be processed back and forth multiple times through the control principle of mutual reference. During the machining process, when the machining allowance is relatively uniform and small, the machining operation can be carried out by referring to the actual positioning reference of the workpiece surface.
4.3 Determine the positioning reference of the parts
When confirming and controlling the positioning benchmark of the parts, engineers need to refer to the corresponding control principles, combined with the important control ideas of benchmark overlap, benchmark unity, and mutual reference, to process as many surfaces as possible in one clamping process. Specifically, in order to ensure that the coaxiality of the supporting journal and the inner cone surface of the spindle can be maintained at the same height, the corresponding reference plane can be selected based on the principle of mutual reference control. For example, Combining the 1:20 tapered hole at the small end of the car and the Mohs No. 6 inner tapered hole at the large end, as it is adjacent to the supporting bearing neck, it can be set as the same reference.
5. Mechanical Processing Technology of Lathe Spindle Parts
5.1 Heat treatment process
By analyzing and comparing the machining process of lathes, it can be seen that implementing necessary heat treatment is essential in the current production and manufacturing activities of lathe spindle parts. During this process, engineering personnel and corresponding production control personnel need to strictly refer to the process flow card and standard operating instructions to implement strict control over each process.
In the process of combining heat treatment technology, the staff should clarify the time nodes used in the relevant processes. As the quality of the heat treatment process directly affects the quality and efficiency of the lathe spindle parts processing, it also affects the final production efficiency of the lathe. Therefore, in the process of controlling the heat treatment of spindle parts materials, it is necessary to start from the blank stage to the subsequent forming stage Necessary heat treatment control is carried out during the precision machining stage, so the entire heat treatment process runs through every time of the production and manufacturing of the lathe spindle parts.
In the rough machining section, it involves the scientific selection of materials for processing relevant spindle parts, as well as the corresponding heat treatment. According to the processing requirements, the production and manufacturing control of the lathe spindle parts blank is completed. During this period, engineering personnel should consider the actual use of the lathe spindle, scientifically and reasonably select the corresponding workpiece materials, and then forge and shape them, and perform necessary heat treatment on the relevant materials, Through necessary thermal treatment, the material cutting performance of relevant components is effectively improved, ultimately resulting in a significant increase in the comprehensive performance of the lathe spindle. In addition, during the processing and control of part materials, the wear resistance of the surface of the lathe spindle parts during movement can also be effectively improved. Afterwards, production personnel need to select different production control modes based on the production and manufacturing situation of the lathe spindle parts blank, quantity, and production needs, such as combining free forging or large-scale production processing.
For example, in the rough machining process, a series of forging treatments are required first. During the forging process, necessary grinding and rough machining of holes are required (positioning with semi precision machined outer surface and matching with cone plugs after machining) → precision machining of outer surface (positioning with cone plug top hole) → precision machining of cone holes (positioning with precision machined outer surface).
3.1 Rough machining
In the rough machining section, it involves the scientific selection of materials for processing relevant spindle parts, as well as the corresponding heat treatment. According to the processing requirements, the production and manufacturing control of the lathe spindle parts blank is completed. During this period, engineering personnel should consider the actual use of the lathe spindle, scientifically and reasonably select the corresponding workpiece materials, and then forge and shape them, and perform necessary heat treatment on the relevant materials, Through necessary thermal treatment, the material cutting performance of relevant components is effectively improved, ultimately resulting in a significant increase in the comprehensive performance of the lathe spindle components. In addition, during the processing and control of part materials, the wear resistance of the surface of the lathe spindle parts during movement can also be effectively improved. Afterwards, production personnel need to select different production control modes based on the production and manufacturing situation of the lathe spindle parts blank, quantity, and production needs, such as combining free forging or large-scale production processing.
For example, in the rough machining process, a series of forging treatments are required first, and during the forging process, necessary grinding processes are required. In this process, a precision forging machine is used, and after completing the forging, heat treatment is required with the help of a tempering furnace. Then, necessary cutting treatment is carried out on the material through a sawing machine, referring to standard documents. Based on the length of the segment processed, after completing the sawing operation, a machine milling machine needs to be combined, Implement necessary milling and end face drilling based on the small end shape, and after completing the end face drilling, carry out turning machining to meet the actual needs of subsequent semi precision machining, and achieve preliminary machining control of the spindle parts. Forging (grinding/vertical precision forging machine) → Heat treatment (normalizing/tempering furnace) → Sawing (sawing the small end, maintaining a total length of 890+2.5mm/sawing machine) → Punching the center hole on the washing end face (drilling a 5mm center hole on the turning end face, small end shape/washing machine/drilling machine) → Turning (roughing the outer diameter of each section, with an average allowance of 2.5-3mm for the large end shape and the center hole on the broken end and small end/lathe).
3.2 Semi precision machining
In terms of corresponding semi precision machining, the radius of the lathe spindle parts needs to be effectively controlled, and initial machining management is required for structures such as taper holes, turning cone surfaces, and precision turning outer circles. This part is the key process for realizing basic functions of the lathe spindle parts. After completing semi precision machining, the external shape of the lathe spindle parts can be basically confirmed. This type of machining process involves some mechanical processing, It is necessary to combine various mechanical equipment such as lathes, drilling machines, milling machines, sawing machines, etc., and then perform necessary heat treatment on the lathe spindle parts to implement corresponding semi precision machining. In the process of rough machining management of the outer surface of the parts, it is necessary to combine the corresponding top hole positioning, and then rough machining of drilled through holes and tapered holes to ultimately achieve semi precision machining of the lathe spindle parts.
For example, in the process of semi precision machining, it is necessary to use the corresponding drilling machine to complete the fine drilling of the equipment. After completing the drilling, combined with heat treatment, the heat treatment control of the local area is completed according to the corresponding specifications, making the lathe processing more efficient and fast. Then, combined with the lathe and the imitation lathe, the preliminary processing of the appearance of the spindle components is completed. Car (outer diameter of each section of the rough car, with an allowance of 2.5-3mm for the large end shape and small end center hole/lathe) → Car (rough car D, E and 165mm outer circles, with an allowance of 2.5-3mm for the small end shape and 115mm surface/lathe) → Car (rough car large end rear section and 115mm outer circle connect with the upper process to level the large end shape and small end center hole/lathe) → Drill (drill 45mm guide hole, small end shape 115mm surface/drilling machine) → Drill (Drill 45mm through hole small end shape, 115mm deep surface hole/drilling machine).
3.3 Precision machining
In the subsequent precision machining process, it is implemented after semi precision machining, which is also the final machining program of the lathe spindle parts. After semi precision machining, the staff need to confirm the precision machining process. This machining process needs to be further processed on the outer surface of the lathe parts and the structural components of the relevant taper hole parts that have not been completed in the previous stage, combined with necessary analysis of the lathe spindle structure, Process the bolts, screw holes, taper holes, and threads accordingly. After completing the processing of the relevant areas, the spindle parts need to be quenched to improve the structural height and motion accuracy of the entire component. After quenching, the torque, bending moment, and rotation accuracy of the spindle parts can meet the corresponding setting requirements. After completing the processing, The staff needs to conduct refined inspections on it, implement comprehensive quality inspections on all parts of the lathe spindle parts, and ensure that the machining quality of the parts can meet the actual usage needs of the lathe main structure stiffness, strength, rotation accuracy, and operational accuracy.
4. Setting of machining reference for lathe spindle parts
4.1 Selection of Coarse Datum
In the process of controlling the machining of machine tool spindle parts, engineers need to ensure that the boundary between the relevant machining positions and the non machining positions is clear. Generally, the non machining surface needs to be selected as the reference line. During the machining process, the corresponding machining allowance should be analyzed based on each machining surface, and then it can be effectively allocated. In the process of selecting the reference, important machining surfaces need to be selected. In addition, the relevant reference cannot be used back and forth during the machining process. Due to the lack of high precision in coarse precision, it can cause significant machining errors. Therefore, coarse reference in the same dimension direction can only be used once.
4.2 Selection of Precision Benchmarks
In the process of selecting and selecting precision benchmarks, it is also necessary to ensure that the design benchmark and positioning benchmark can effectively overlap, minimize positioning errors generated during the machining process, and ensure the principle of unified control of benchmarks. In short, engineers need to process multiple workfaces under the same positioning benchmark to improve the accuracy of the machining positions on each surface. In general, it is necessary to use the two tips of shaft parts as corresponding positioning benchmarks; In addition, it is necessary to strictly refer to the control principle of mutual reference. If the surfaces of two workpieces have high machining accuracy requirements, they can be processed back and forth multiple times through the control principle of mutual reference. During the machining process, when the machining allowance is relatively uniform and small, the machining operation can be carried out by referring to the actual positioning reference of the workpiece surface.
4.3 Determine the positioning reference of the parts
When confirming and controlling the positioning benchmark of the parts, engineers need to refer to the corresponding control principles, combined with the important control ideas of benchmark overlap, benchmark unity, and mutual reference, to process as many surfaces as possible in one clamping process. Specifically, in order to ensure that the coaxiality of the supporting journal and the inner cone surface of the spindle can be maintained at the same height, the corresponding reference plane can be selected based on the principle of mutual reference control. For example, Combining the 1:20 tapered hole at the small end of the car and the Mohs No. 6 inner tapered hole at the large end, as it is adjacent to the supporting bearing neck, it can be set as the same reference.
5. Mechanical Processing Technology of Lathe Spindle Parts
5.1 Heat treatment process
By analyzing and comparing the machining process of lathes, it can be seen that implementing necessary heat treatment is essential in the current production and manufacturing activities of lathe spindle parts. During this process, engineering personnel and corresponding production control personnel need to strictly refer to the process flow card and standard operating instructions to implement strict control over each process.
In the process of combining heat treatment technology, the staff should clarify the time nodes used in the relevant processes. As the quality of the heat treatment process directly affects the quality and efficiency of the lathe spindle parts processing, it also affects the final production efficiency of the lathe. Therefore, in the process of controlling the heat treatment of spindle parts materials, it is necessary to start from the blank stage to the subsequent forming stage Necessary heat treatment control is carried out during the precision machining stage, so the entire heat treatment process runs through every time of the production and manufacturing of the lathe spindle parts.
5.2 Key Process Points for Lathe Spindle Parts Stage
In the construction control process of the lathe spindle parts stage, there are relatively many process flows used in combination, with a relatively large workload and high machining accuracy requirements. In this process, the main goal is to achieve processing control for subsequent precision machining. The series of work carried out in this stage is to lay the corresponding foundation for subsequent precision machining. In the subsequent rough machining, semi precision machining, and precision machining processes, engineering personnel need to further remove the stress of the material, laying a solid foundation for the subsequent heat treatment process. In addition, the spindle parts of the lathe can avoid corresponding errors in machining after multiple reciprocating cutting treatments, while also ensuring that different mechanical equipment can achieve reasonable coordination and use, improve machining accuracy, and appropriately reduce wear and tear on the machine tool. During the initial machining process, different machine tools can be selected for machining control, improving machining quality and efficiency, while also reducing wear and tear on the machine tool.
5.3 Process route
In the process of formulating the process route, engineering personnel need to refer to the geometric shape, precision position, and precision requirements of the processed object to select an appropriate process route. The basic process route involves corresponding processes such as material preparation, forging, heat treatment, sawing, turning, drilling, polishing, milling, deburring, inspection, etc. Different process routes have corresponding differences in turning, polishing, and drilling (as shown in Table 1), and also have different processing standards and equipment. During this process, engineering personnel should select appropriate process routes based on specific processing control requirements to meet production and manufacturing needs. In terms of industrial production routes, the main approach is to adopt the control concept of milling the surface first and then drilling, combined with the control principle of surface first and then drilling. However, during the processing and production process, engineering personnel also need to effectively control the areas related to the upper plane of the right cylinder of the workpiece and the lower plane of the left cylinder that are difficult to locate and clamp.
Therefore, engineering personnel need to strictly control the processing sequence of each workpiece, clarify the processing quantity, reasonably control the processing tolerance, and control the processing error within a reasonable range.
After completing production and processing, it is necessary to use a micrometer to measure the accuracy of the appearance of the object. After completing large-scale production and manufacturing, it is also necessary to use a smooth limit gauge to inspect its surface. For workpieces with larger length but higher accuracy, a comparator can be used for testing. When evaluating the roughness of the workpiece surface, a roughness sample can also be used for inspection, For areas with relatively high roughness requirements, optical microscopy can be used to evaluate their contours.
6. Conclusion
Overall, in the process of implementing machining management for lathe spindle parts, staff should analyze and evaluate various process indicators and process documents, reasonably formulate various benchmarks and process procedures, clarify various machining control requirements, and improve machining accuracy and quality.
In the construction control process of the lathe spindle parts stage, there are relatively many process flows used in combination, with a relatively large workload and high machining accuracy requirements. In this process, the main goal is to achieve processing control for subsequent precision machining. The series of work carried out in this stage is to lay the corresponding foundation for subsequent precision machining. In the subsequent rough machining, semi precision machining, and precision machining processes, engineering personnel need to further remove the stress of the material, laying a solid foundation for the subsequent heat treatment process. In addition, the spindle parts of the lathe can avoid corresponding errors in machining after multiple reciprocating cutting treatments, while also ensuring that different mechanical equipment can achieve reasonable coordination and use, improve machining accuracy, and appropriately reduce wear and tear on the machine tool. During the initial machining process, different machine tools can be selected for machining control, improving machining quality and efficiency, while also reducing wear and tear on the machine tool.
5.3 Process route
In the process of formulating the process route, engineering personnel need to refer to the geometric shape, precision position, and precision requirements of the processed object to select an appropriate process route. The basic process route involves corresponding processes such as material preparation, forging, heat treatment, sawing, turning, drilling, polishing, milling, deburring, inspection, etc. Different process routes have corresponding differences in turning, polishing, and drilling (as shown in Table 1), and also have different processing standards and equipment. During this process, engineering personnel should select appropriate process routes based on specific processing control requirements to meet production and manufacturing needs. In terms of industrial production routes, the main approach is to adopt the control concept of milling the surface first and then drilling, combined with the control principle of surface first and then drilling. However, during the processing and production process, engineering personnel also need to effectively control the areas related to the upper plane of the right cylinder of the workpiece and the lower plane of the left cylinder that are difficult to locate and clamp.
Therefore, engineering personnel need to strictly control the processing sequence of each workpiece, clarify the processing quantity, reasonably control the processing tolerance, and control the processing error within a reasonable range.
After completing production and processing, it is necessary to use a micrometer to measure the accuracy of the appearance of the object. After completing large-scale production and manufacturing, it is also necessary to use a smooth limit gauge to inspect its surface. For workpieces with larger length but higher accuracy, a comparator can be used for testing. When evaluating the roughness of the workpiece surface, a roughness sample can also be used for inspection, For areas with relatively high roughness requirements, optical microscopy can be used to evaluate their contours.
6. Conclusion
Overall, in the process of implementing machining management for lathe spindle parts, staff should analyze and evaluate various process indicators and process documents, reasonably formulate various benchmarks and process procedures, clarify various machining control requirements, and improve machining accuracy and quality.

