Categories
Contact Us

Taizhou Hongchuang Automation Equipment Co.,Ltd

Address:Port City Of Shamen Town, Yuhuan County, Taizhou City, Zhejiang Province, China

Contact:Amy Hou

Mobile:+8618906570891 

E-mail:amy@brass-valve-machine.com

News
Home > News > Content
Type Of Lathe
Nov 27, 2017

General Lathe

The processing object is wide, the spindle speed and feed adjustment range is big, can process the inside and outside surface of workpiece, end face and inside and outside thread. This kind of lathe mainly by the worker manual operation, the production efficiency is low, is suitable for the single piece, the small batch production and the repair workshop.

Turret and slewing lathe

With the turret or turret of the turret which can be fitted with many knives, the worker can use different tools to complete various processes in one clamping folder of the workpiece, which is suitable for mass production.

Automatic lathe

According to certain procedures to automate the process of small and medium-sized workpiece processing, can automatically up and down, repeat the same batch of work of the workpiece, applicable to large quantities, mass production.

Multi-blade semi-automatic lathe

There are single axes, multi-axis, horizontal and vertical points. The single axis horizontal layout form is similar to the ordinary lathe, but the two sets of turret are installed in the spindle or up or down respectively, for processing the disc, the ring and the shaft type workpiece, its production rate is higher $number times than the ordinary lathe.

Profiling lathe

Can imitate the sample or sample shape size, automatic completion of workpiece processing cycle (see profiling machine), suitable for the complex shape of small batches and batches of production, productivity than the common lathe $number times higher. There are multiple turret, multi-axis, chuck type, vertical and other types.

Vertical lathe

The spindle is perpendicular to the horizontal plane, and the workpiece is mounted on a level rotary working table, and the turret is moved on the beam or column. It is suitable for the workpiece which is larger, heavier and difficult to be installed on the ordinary lathe, and is divided into two categories, single column and double pillar.


  • Newsletter
  • Categories
  • Contact Us

    Taizhou Hongchuang Automation Equipment Co.,Ltd

    Address:Port City Of Shamen Town, Yuhuan County, Taizhou City, Zhejiang Province, China

    Contact:Amy Hou

    Mobile:+8618906570891 

    E-mail:amy@brass-valve-machine.com

  • QR Code
  • Copyright © Taizhou Hongchuang Automation Equipment Co.,Ltd All Rights Reserved.