Categories
Contact Us

Taizhou Hongchuang Automation Equipment Co.,Ltd

Address:Port City Of Shamen Town, Yuhuan County, Taizhou City, Zhejiang Province, China

Contact:Amy Hou

Mobile:+8618906570891 

E-mail:Houxiaojing0411@126.com

News
Home > News > Content
Operating Procedures For Lathes
Nov 27, 2017

1. Before turning on the lathe, first check the oil and rotational parts are flexible and normal, wear tight overalls when turning on, cuff buckle tight, long hair to take protective hat, prohibit wearing gloves, cutting workpiece and knife must wear glasses. 2. When starting to observe the equipment is normal, the car knife to clamp firmly, eat knife depth can not exceed the load of the equipment itself, the knife head out of the body should not exceed 1.5 times times the height of the knife, turn the knife back to the safe position, to prevent the collision of the car blade, on the gong piece, the bed surface to mat plank. When the workpiece is loaded with a crane, the clamping plate is not clamped and the workpiece is not allowed to remove the spreader, and the whole control power of the crane is disconnected. When the workpiece is clamped, the sling must be removed before the lathe rotates. 3. Use emery cloth Miller pieces, emery cloth to use hardwood pads, vehicle knives to move to a safe position, the tool holder surface is not allowed to place tools and parts, needle plate to be put in jail. 4. Lathe rotation speed should stop turning the lathe can be converted, so as not to touch the gear, when driving, the vehicle knife to slowly close to the workpiece, so as to avoid crumbs or damage to the workpiece. 5. Lathe working time can not leave the job at will, prohibit joke slapstick, something to leave must stop power, the work of thinking to concentrate, the machine can not be measured in operation of the workpiece, can not be in the operation of the lathe near the replacement of clothing newspaper, failed to obtain an induction card personnel can not operate lathes alone.                                

  • Newsletter
  • Categories
  • Contact Us

    Taizhou Hongchuang Automation Equipment Co.,Ltd

    Address:Port City Of Shamen Town, Yuhuan County, Taizhou City, Zhejiang Province, China

    Contact:Amy Hou

    Mobile:+8618906570891 

    E-mail:Houxiaojing0411@126.com

  • QR Code
  • Copyright © Taizhou Hongchuang Automation Equipment Co.,Ltd All Rights Reserved.