Categories
Contact Us

Taizhou Hongchuang Automation Equipment Co.,Ltd

Address:Port City Of Shamen Town, Yuhuan County, Taizhou City, Zhejiang Province, China

Contact:Amy Hou

Mobile:+8618906570891 

E-mail:amy@brass-valve-machine.com

Knowledge
Home > Knowledge > Content
What are the main differences between a servo press and a hydraulic press
Jun 22, 2018

The servo press, also known as the electronic press, differs from the hydraulic press as follows:

A, drive mode: high precision CNC electronic press is driven by servo motor precision ball screw pressure assembly operations, direct pressure by servo motor torque output and into;

The general hydraulic press is driven by the motor oil pump, which changes direction through the reversing valve and then carries out the pressure operation by the hydraulic cylinder. The pressure goes through the tubing and valve body, and there is a certain loss.

Second, the energy conservation and environmental protection: adopt servo motor, precision CNC electronic press the standby mode, the motor does not turn, and in the process of being connected, speed is variable, power is also changing.

In the ordinary hydraulic press, the motor is always turning during standby, which requires a certain amount of electricity. It also rotates at a constant speed during work, and the power consumption will be higher.

Compared with the servo motor, the noise is also higher.

Three, precise control: precision CNC electronic press, within a certain range can be set arbitrary section of the stroke speed, precise displacement arrive stop, precision, precision pressure to stop, etc.

While ordinary hydraulic press by pipe and valve body and oil cylinder cylinder sealing effect, it is impossible to have high accuracy control, and many are realized by means of the mechanical limit, to be close to the electronic press control accuracy, equipment cost will be far higher than the electronic press and control more complicated.

Functions: precision electronic press has the following functions:

A determination of online ballast quality: the whole process curve of mounting force and displacement can be displayed on the LCD touch screen;

The whole process control can automatically determine whether the product is qualified at any stage of operation, and remove the defective product 100% of the time, so as to achieve online quality management.

B. The pressing force, the depth of the pressing, the pressing speed and the holding time, etc. can all be entered in the operation panel with friendly interface and simple operation.

C can customize, store and call 100 sets of ballast programs by itself: seven types of ballast modes are available to meet your different process requirements.

D. Connected to the computer through external ports, ballast data can be stored in the computer to ensure traceability of product processing data and facilitate production quality control and management;

E due to the machine itself has accurate stress and displacement of the control function, so does not need to be hardened limit on tooling, and processing of different specifications products just call different installation procedures, so you can easily achieve multi-usage and flexible set of lines.

Hydraulic press:

1. Low safety and high noise.

High power consumption and pollution.

3. Precision control is not easy.

4. Quality management is not easy.

5. High mould cost.


  • Newsletter
  • Categories
  • Contact Us

    Taizhou Hongchuang Automation Equipment Co.,Ltd

    Address:Port City Of Shamen Town, Yuhuan County, Taizhou City, Zhejiang Province, China

    Contact:Amy Hou

    Mobile:+8618906570891 

    E-mail:amy@brass-valve-machine.com

  • QR Code
  • Copyright © Taizhou Hongchuang Automation Equipment Co.,Ltd All Rights Reserved.