Categories
Contact Us

Taizhou Hongchuang Automation Equipment Co.,Ltd

Address:Port City Of Shamen Town, Yuhuan County, Taizhou City, Zhejiang Province, China

Contact:Amy Hou

Mobile:+8618906570891 

E-mail:Houxiaojing0411@126.com

Knowledge
Home > Knowledge > Content
Selection of milling cutter for CNC machine
Nov 27, 2017

CNC machine tool hard platform gold indexable surface Milling cutter is mainly used in milling plane. In rough milling, the diameter of milling cutter is smaller, because the cutting force of coarse milling is large, the cutting torque can be reduced by choosing small diameter milling cutter. CNC machine tool milling, milling cutter diameter selected a large number, it is best to be able to accommodate the entire width of the surface to improve the T precision and efficiency. Machine tool processing allowance is large and uneven, the diameter of the tool should be selected smaller, otherwise, will be caused by hanging knife blade too deep and affect the jadin quality of the workpiece.

High-speed steel milling cutter is used to process the convex table and groove, generally not used to process the blank surface-because the hardened layer and the clamping sand of the blank surface will speed up the tool wear.

When machining blank surface or roughing hole, the milling cutter with cemented carbide or corn milling cutter can be selected for strong cutting.

When machining planar workpiece periphery contour, it is often used the vertical milling cutter C.

In order to increase the precision of groove width, reduce the number of changing knives, the milling cutter with diameter ratio slot width is 7, the middle part of the first milling groove can be used, and then the tool radius is used to compensate both sides of the milling groove.

When machining three-dimensional surface or variable bevel contour, ball-end milling cutter, annular milling cutter, drum-shaped milling cutter, conical milling cutter and disc milling cutter are often used.

When the processing allowance is small, and the surface roughness is higher, the surface milling cutter with cubic boron nitride blade or inlaid ceramic blade can be used for high-speed cutting of machine tools.


  • Newsletter
  • Categories
  • Contact Us

    Taizhou Hongchuang Automation Equipment Co.,Ltd

    Address:Port City Of Shamen Town, Yuhuan County, Taizhou City, Zhejiang Province, China

    Contact:Amy Hou

    Mobile:+8618906570891 

    E-mail:Houxiaojing0411@126.com

  • QR Code
  • Copyright © Taizhou Hongchuang Automation Equipment Co.,Ltd All Rights Reserved.