Categories
Contact Us

Taizhou Hongchuang Automation Equipment Co.,Ltd

Address:Port City Of Shamen Town, Yuhuan County, Taizhou City, Zhejiang Province, China

Contact:Amy Hou

Mobile:+8618906570891 

E-mail:Houxiaojing0411@126.com

Knowledge
Home > Knowledge > Content
Selection of function and accessory selection of CNC machine
Nov 27, 2017

One,selection of spindle motors:

1. Should meet the cutting speed of the machine tool, unit time metal removal rate, spindle low-speed large torque requirements;

2. The motor power calculated according to the required spindle acceleration/deceleration time should not exceed its maximum output power.

3. The average power of the spindle which is frequently set and braked cannot exceed its continuous rated output power.

4. Constant speed control occasions, the constant speed required for cutting speed power and acceleration of the required power both should be in the motor can provide power range.

Second, the maintenance of mechanical components:

(1) Pneumatic system maintenance

1. Select suitable filter to remove impurities and moisture in compressed air;

2. Check the oil mist in the system, to ensure that the air and the appropriate amount of lubricating oil to lubricate pneumatic components, to prevent rust, wear caused by air leakage and component movement failure;

3. Check and replace seals regularly;

4. Pay attention to adjust work pressure;

5. Regularly check the cleaning or replacement of pneumatic components, filter.

(2) Machine tool Accuracy Maintenance inspection

Machine accuracy checks are required for the following situations:

1. Operation error or machine failure caused crash;

2. The dynamic accuracy of machine tool has changed.


  • Newsletter
  • Categories
  • Contact Us

    Taizhou Hongchuang Automation Equipment Co.,Ltd

    Address:Port City Of Shamen Town, Yuhuan County, Taizhou City, Zhejiang Province, China

    Contact:Amy Hou

    Mobile:+8618906570891 

    E-mail:Houxiaojing0411@126.com

  • QR Code
  • Copyright © Taizhou Hongchuang Automation Equipment Co.,Ltd All Rights Reserved.