Categories
Contact Us

Taizhou Hongchuang Automation Equipment Co.,Ltd

Address:Port City Of Shamen Town, Yuhuan County, Taizhou City, Zhejiang Province, China

Contact:Amy Hou

Mobile:+8618906570891 

E-mail:amy@brass-valve-machine.com

Knowledge
Home > Knowledge > Content
Precautions for operation of milling and drilling machines
Nov 27, 2017

1. When installing workpieces, fixtures and accessories on the milling machine, remove and clean the table and the iron pins and dirt on the mounting surface of the fixture or accessory to avoid affecting the machining accuracy.

2. At the end of the work, the milling cutter should be separated from the workpiece, and the handle shall be placed in an empty position, and the working state of the milling machine, the milling cutter and the fixture will be inspected in general; then cut off the power supply, clean the milling machine, and pour the lubricating oil on the

3. Always do a good job of milling machine maintenance and maintenance. Milling Machine worktable and guide surface are accurate surface, to prevent heavy impact and collision, encountered heavy or rough hair surface should be on the table block blocks, and should be handled. If it is found that the milling machine gearbox has noise, spindle bearing fever and other abnormal conditions, should immediately stop dispatching trouble, do not reluctantly continue to work. The milling machine shall be inspected and planned for maintenance in accordance with the regulations.


  • Newsletter
  • Categories
  • Contact Us

    Taizhou Hongchuang Automation Equipment Co.,Ltd

    Address:Port City Of Shamen Town, Yuhuan County, Taizhou City, Zhejiang Province, China

    Contact:Amy Hou

    Mobile:+8618906570891 

    E-mail:amy@brass-valve-machine.com

  • QR Code
  • Copyright © Taizhou Hongchuang Automation Equipment Co.,Ltd All Rights Reserved.