Categories
Contact Us

Taizhou Hongchuang Automation Equipment Co.,Ltd

Address:Port City Of Shamen Town, Yuhuan County, Taizhou City, Zhejiang Province, China

Contact:Amy Hou

Mobile:+8618906570891 

E-mail:Houxiaojing0411@126.com

Knowledge
Home > Knowledge > Content
Power requirements for CNC machine
Nov 27, 2017

The power supply is the energy support part that keeps the system working properly, and the direct result of its failure or failure is to cause the system to shut down or destroy the entire system. In addition, the NC system part of the operation of data, set data and processing programs, such as general storage in RAM memory, the system after power off, relying on the power supply battery or lithium battery to maintain. As a result, the downtime is relatively long, unplug power or memory can cause data loss, so that the system can not run.

At the same time, because the use of CNC equipment is three-phase AC 380V power supply, so the security is also a key to the installation of CNC equipment in the early work of a link, based on the above reasons, the use of CNC equipment power supply has the following requirements:

1. The voltage fluctuation of the power grid should be controlled in the +10%~-15%, and it is suggested that the AC voltage supply system with automatic compensating adjustment function be configured in the more concentrated workshop of CNC machine tool. Single CNC machine tool can be configured separately to solve the AC voltage regulator.

2. It is recommended that the mechanical electrical equipment be connected to a single power supply. If you need to supply some parts of the electrical equipment (such as electronic circuits, electromagnetic clutches) with other power supplies, these power supplies should be taken as much as possible from the devices (such as transformers, transducers, etc.) that comprise part of the mechanical electrical equipment.

3. CNC Equipment for compressed air supply system requirements CNC machine tools are generally used in a lot of pneumatic components, so the plant should pick up clean, dry compressed air supply system network. Its flow and pressure should meet the requirements. Compressed air is installed in the place away from CNC machine tools.


  • Newsletter
  • Categories
  • Contact Us

    Taizhou Hongchuang Automation Equipment Co.,Ltd

    Address:Port City Of Shamen Town, Yuhuan County, Taizhou City, Zhejiang Province, China

    Contact:Amy Hou

    Mobile:+8618906570891 

    E-mail:Houxiaojing0411@126.com

  • QR Code
  • Copyright © Taizhou Hongchuang Automation Equipment Co.,Ltd All Rights Reserved.