Categories
Contact Us

Taizhou Hongchuang Automation Equipment Co.,Ltd

Address:Port City Of Shamen Town, Yuhuan County, Taizhou City, Zhejiang Province, China

Contact:Amy Hou

Mobile:+8618906570891 

E-mail:amy@brass-valve-machine.com

Knowledge
Home > Knowledge > Content
Angle valve
May 22, 2018

Angle valve is Angle type globe valve, the Angle valve is similar to ball valve, its structure and characteristic are corrected by ball type valve.

The difference between the ball valve and the outlet of the Angle valve is 90 degree Angle.

Angle valve is also called triangle valve, Angle valve, Angle water valve.

This is because the pipe is in a 90-degree corner shape at the corner valve, so it is called the Angle valve, the Angle valve, and the knuckle valve.

classification

1, civil

2. Angle valves for industrial heating pipes.

The valve body of the Angle valve has inlet, water flow control mouth, outlet three mouth, so it is called the triangle valve.

Of course, the Angle valve is continuously improved, although it is still three, but there are not Angle valves.

The Angle valve of the industry refers to the Angle control valve except the valve body is right Angle, the other structure is similar to the direct pass single seat regulating valve.

Its features are:

1. The flow path is simple, and the dead zone and vortex area are smaller, which can effectively prevent the blocking of the medium, which means that there is better self-cleaning performance.

2. The flow resistance is small, and the flow coefficient is larger than the single seat valve, which is equivalent to the flow coefficient of the two-seat valve;

It is suitable for high viscosity, suspended solids and granular fluids, or used for requiring rectangular piping.

The flow tends to go down to the bottom.

In special case it can be reversed, that is, it flows to the bottom.

The triangulation valve is cold and hot two kinds (with blue, red mark distinguish) its material material is most manufacturer is same, the cold and heat mark, basically is to distinguish which is hot water, which is cold water.

The production process

Raw materials (copper, steel, etc.), cut off by material amount, high temperature forging, machining, polishing processing, electroplating, assembly.

role

Angle valve has four main functions:

(1) to transfer the water outlet inside and outside;

The water pressure is too big, can be adjusted on the triangle valve, turn down a little;

The function of the switch, if the tap water leakage occurs, the triangle valve can be turned off, no need to close the home valve;

Beautiful and graceful.

Therefore, the general bridal chamber is decorated is indispensable water heating fittings, so decorates a new house when stylist also will mention.

The difference between

What is the difference between the quick opening triangle valve and the ordinary triangle valve:

One is the rubber ring valve core, one is the ceramic valve core, quick opening is the latter, only 90 degree can be done, commonly known as quick opening type.

Normally, Angle valves are also used on gas stoves.

Use fixed number of year

The red impact and the forging press are over 10 years, and the 5-8 years of the molting are about 3 years. The alloy will be brittle for 3 years or so, which may be broken to the pipe and cannot be replaced. The copper is easy to change.

The use of

Toilet 1, basin faucet 2, dish basin faucet 2, water heater 2, you if a kitchen 1 wei need 7, many can follow this calculation.


  • Newsletter
  • Categories
  • Contact Us

    Taizhou Hongchuang Automation Equipment Co.,Ltd

    Address:Port City Of Shamen Town, Yuhuan County, Taizhou City, Zhejiang Province, China

    Contact:Amy Hou

    Mobile:+8618906570891 

    E-mail:amy@brass-valve-machine.com

  • QR Code
  • Copyright © Taizhou Hongchuang Automation Equipment Co.,Ltd All Rights Reserved.