Categories
Contact Us

Taizhou Hongchuang Automation Equipment Co.,Ltd

Address:Port City Of Shamen Town, Yuhuan County, Taizhou City, Zhejiang Province, China

Contact:Amy Hou

Mobile:+8618906570891 

E-mail:amy@brass-valve-machine.com

CNC Lathe Machine

Alloy Wheel CNC Lathe

Alloy Wheel CNC Lathe

The characteristics of CNC machine tool 1. Characteristics of CNC machine tool (1) highly flexible The machining parts of nc machine tool mainly depend on the processing program. It is different from ordinary machine tool. It does not need to manufacture, replace many tools and fixtures, and it......

Alloy Wheel CNC Lathe

The characteristics of CNC machine tool

1. Characteristics of CNC machine tool

(1) highly flexible

The machining parts of nc machine tool mainly depend on the processing program. It is different from ordinary machine tool. It does not need to manufacture, replace many tools and fixtures, and it does not need to adjust the machine frequently.Therefore, the CNC machine is suitable for frequent replacement of parts.It is suitable for the development of single piece, small batch production and new product, shorten the production preparation cycle, and save the cost of a lot of process equipment. 

(2) high machining accuracy

Machining accuracy of nc machine tools, general can reach 0.005 ~ 0.1 mm, nc machine tools is according to the form of digital signal control, numerical control device for each pulse signal, the output is the machine moving parts move a pulse equivalent (0.001 mm), and machine tool feed drive chain of the reverse clearance and screw pitch error of the mean can compensate by numerical control device, as a result, the numerical control machine tool positioning accuracy is higher. 

(3) the processing quality is stable and reliable

The same machine tool is used in the same machine tool, and the tool is used in the same processing condition. The tool's walking tool has the same trajectory, the consistency of the parts is good, and the quality is stable. 

(4) high productivity

Nc machine tool can effectively reduce the processing time and auxiliary time parts, large range of nc machine tool spindle speed and feed, allow big strong cutting the amount of cutting machine tools, CNC machine tools is now into the era of high speed machining, CNC machine fast moving and positioning of moving parts and high speed cutting processing, reduce the intermediate process between the turnaround time, improve the production efficiency. 

(6) facilitate the modernization of production management

The machining of CNC machine tool can estimate the machining time in advance, and the tool and fixture can be standardized and modernized.Nc machine tools using digital control signal and standard code for information, easy to implement the standardization of processing information, is now with the computer aided design and manufacture (CAD/CAM) organically, is the foundation of the modern integrated manufacturing technology.


Name: CJK6140 CNC lathe

Product introduction

CJK6140 CNC lathe, easy to operate, easy to operate, large supply.Compared with other types of lathe, it has the width and length of the bed, the steel is good, the precision is high, the stability is good, there are the tail seats, the different clamping system and the tool holder can be configured according to the user's requirement.


CJK6140Main technical parameters of CNC lathe

Project content

Company

parameter

Maximum revolution diameter of bed

mm

φ400

Maximum revolution diameter of excess carriage

mm

φ230

Maximum top margin

mm

700

Maximum Z-axle stroke

mm

With tailstock675/Mot with tailstock700

Maximum X-axle stroke

mm

340

Rapid travel speed

mm/min

X:6 Z:8

Diameter of spindle through hole

mm

φ50

Power of main motor

kw

5.5/7.5

Rotation speed of spindle

r/min

150-2500

Sectional ayea of cutter arbor

mm

20X20

Stroke of tailstock sleeve

mm

150

Taper of sleeve bore

mt

NO.4

Chuck specification

mm

φ200/φ250

Positioning accuracy

mm

X:0.01 Z:0.01

Pulse equivalent

mm

X:0.0005 Z:0.001

Cooling water pump

w

90

Weight of machine tool

kg

≈2000

Contour dimension of machine tool(LxWxH)

mm

≈2200X1150X1750


CJK6140CNC lathe standards and selection function

Beijing KND CNC system

S

Sfepping drive

S

¢200 three-jawed chuck 

S

Four-workstation automatic tool turret

S

5.5KW spindle motor

S

Hand apex tailstock

S

Stepless speed regulation spindle

S

Automatic centralized lubricating system

S

Thread function of Metric/British standard

S/

Coolang system

S/

Guangzhou CNC and other

O

AC servo system

O

¢250 three-jawed chuck 

O

Tool carriage

O

7.5KW spindle motor

O

 S: Standard  O: Select  /: Not Select


All kinds of equipment produced by the company

type of eqipment.png

 

Service commitment

Pre-sale, sale, after-sales service guarantee system

At the beginning of sales, we will have a professional sales engineer to patiently communicate with you, understand your needs and choose the best solution for you.We accept special customization for your special needs.

Since equipment reach the customer time, the quality of the machine tool itself causes of failure, one year free warranty, fault caused by the quality of the machine tool itself reason, also actively cooperate with, repair, maintenance.

Guarantee the supply of spare parts for the whole life, make sure to buy the machine.Hongchuang customer service center is equipped with special machines, electricity and hydraulic maintenance engineers, 48 hours in the province, and 72 hours of domestic service in place.

When you use hongchuang products to help you, please call hongchuang service center and we will help you.


FAQ

Q:How do I get a quotation?

A:Let us design according to your purchase request, we will reply you as soon as possible, and you can contact us directly by phone or email.

Q:Can you provide a customized machine?

A:Yes, our company can be customized according to customer's requirements

Q:Can you provide training for operating machines?

A:Yes, our factory has free training

Hot Tags: alloy wheel CNC lathe, China, factory, manufacturers, discount, customized
  • Newsletter
  • Categories
  • Contact Us

    Taizhou Hongchuang Automation Equipment Co.,Ltd

    Address:Port City Of Shamen Town, Yuhuan County, Taizhou City, Zhejiang Province, China

    Contact:Amy Hou

    Mobile:+8618906570891 

    E-mail:amy@brass-valve-machine.com

  • QR Code
  • Copyright © Taizhou Hongchuang Automation Equipment Co.,Ltd All Rights Reserved.